1.Fully charged and discharged several time when you first time use the battery
2.All of our batteries can be charged by the original battery chargers. On the other hand, our battery chargers can charge the OEM batteries.
3.Please store the battery in a dry, shady and clear place. And the capacity will lost if it is not be used for a long time.
4.The battery has a life time. It is time to change a new one the when use time become shorter and shorter after it had been charge for 500-800 cycles.
5.It will die if it is too cold. Someone asked if the battery can be kept in the refrigerator. The answer is yes as long as you keep it dry.
6.How Long Will the New Battery Power My Laptop?
This is difficult to determine. Actual laptop battery running time depends upon the power demands made by the equipment. The use of the monitor, the hard drive and other accessories results in an additional drain upon the battery, effectively reducing its running time. The total running time of the battery is also dependent upon the design of the equipment. Generally, a new eBatts.com battery will run at least as long (and usually longer) as your old battery did when it was new.
7.Ni-cd batteries, and to a lesser extent Ni-MH batteries, suffer from what’s called the “memory effect”.
What this means is that if a battery is repeatedly only partially discharged before recharging, the battery “forgets” that it has the capacity to further discharge all the way down.
Fully cycle (fully charge and then fully discharge) the battery at least once every two to three weeks.

8.New batteries are hard for your device to charge; they have never been fully charged and are therefore “unformed”. Sometimes your device’s charger will stop charging a new battery before it is fully charged. If this happens, simply remove the battery from your device and then re-insert it. The charge cycle should begin again. This may happen several times during your first battery charge. Don’t worry, it’s perfectly normal.
New batteries are shipped in a discharged condition and must be charged before use.
9.The right way to full charge and discharge your battery: First Shut down the “energy saving” option at Bios, select “Never No” in all options of “Power Source Usage” Selection under Windows, and take out all options’ hook at “Alarming” selection. Restart your computer when the battery’s power arrive at about 5%. Press “pause” when the screen appears self-test, and then shut down the screen and let the battery discharge at a low electric current until Auto power off and then power on. The full cycle completed.
10.In order to prolong your battery’s life, you need to save the energy in your daily using. You can Select “Maximum Battery Life” at “power source” selection at Bios, or you can shut down some installations, such as Parallel Port, infrared ray etc. Selecting the suitable power source usage in the ” Power source manage” selection under Windows. Also you can use some cooling software to cooling the CPU to save the energy.
Read More